Free demo
PSE-StrataDC Free Demo Questions
A sample from the full question set for this exam.
QUESTION 1 OF 5
What is the default session distribution policy in the PA - 7000 Series?
Correct Answer: D
(
PA - 7000 Series firewalls only
) New sessions are assigned to a DP on the same NPC on which the first packet of the session arrived.
The selection of the DP is based on the session - load algorithm but, in this case, sessions are limited
to the DPs on the ingress NPC.
Depending on the traffic and network topology, this policy generally decreases the odds that traffic
will need to traverse the switch fabric.
Use this policy to reduce latency if both ingress and egress are on the same NPC. If the firewall has a
mix of NPCs (PA - 7000 20G and PA - 7000 20GXM for example), this policy can isolate the increased
capacity to the corresponding NPCs and help to isolate the impact of NPC failures.
PA - 7000 Series firewalls only
) New sessions are assigned to a DP on the same NPC on which the first packet of the session arrived.
The selection of the DP is based on the session - load algorithm but, in this case, sessions are limited
to the DPs on the ingress NPC.
Depending on the traffic and network topology, this policy generally decreases the odds that traffic
will need to traverse the switch fabric.
Use this policy to reduce latency if both ingress and egress are on the same NPC. If the firewall has a
mix of NPCs (PA - 7000 20G and PA - 7000 20GXM for example), this policy can isolate the increased
capacity to the corresponding NPCs and help to isolate the impact of NPC failures.
QUESTION 2 OF 5
Which three deployment modes of VM - Series firewalls are supported across NSX - T? (Choose three )
Correct Answer: A,D,E
https://docs.paloaltonetworks.com/vm - series/9 - 0/vm - series - deployment/set - up - the - vm - series - firewall - on - nsx/set - up - the - vm - series - firewall - on - nsx - t/supported - deployments - of - the - vm - series - firewall - on - vmware - nsx - t.html You can deploy one or more instances of the VM - Series firewall as a partner service in your VMware NSX - T Data Center. Attach a VM - Series firewall to any tier - 0 or tier - 1 logical router to protect north - south traffic. You can deploy the VM - Series firewall as standalone service instance or two firewalls in a high - availability (HA) pair. Panorama manages the connection with NSX - T Manager and the VM - Series firewalls deployed in your NSX - T software - defined datacenter.
Tier - 0 Insertion — Tier - 0 insertion deploys a VM - Series firewall to a tier - 0 logical router, which processes traffic between logical and physical networks. When you deploy the VM - Series firewall with tier - 0 insertion, NSX - T Manager uses the deployment information you configured on Panorama to attach a firewall to a tier - 0 logical router in virtual wire mode. Tier - 1 Insertion — Tier - 1 insertion deploys a VM - Series firewall to a tier - 1 logical router, which provides downlink connections to segments and uplink connection to tier - 0 logical routers. NSX - T Manager attaches VM - Series firewalls deployed with tier - 1 insertions to a tier - 1 logical router in virtual wire mode. After deploying the firewall, you configure traffic redirection rules that send traffic to the VM - Series firewall when crossing a tier - 0 or tier - 1 router. Security policy rules that you configure on Panorama are pushed to managed VM - Series firewalls and then applied to traffic passing through the firewall.
Tier - 0 Insertion — Tier - 0 insertion deploys a VM - Series firewall to a tier - 0 logical router, which processes traffic between logical and physical networks. When you deploy the VM - Series firewall with tier - 0 insertion, NSX - T Manager uses the deployment information you configured on Panorama to attach a firewall to a tier - 0 logical router in virtual wire mode. Tier - 1 Insertion — Tier - 1 insertion deploys a VM - Series firewall to a tier - 1 logical router, which provides downlink connections to segments and uplink connection to tier - 0 logical routers. NSX - T Manager attaches VM - Series firewalls deployed with tier - 1 insertions to a tier - 1 logical router in virtual wire mode. After deploying the firewall, you configure traffic redirection rules that send traffic to the VM - Series firewall when crossing a tier - 0 or tier - 1 router. Security policy rules that you configure on Panorama are pushed to managed VM - Series firewalls and then applied to traffic passing through the firewall.
QUESTION 3 OF 5
Which configuration is required to share NSX security groups as tags to be used by Dynamic Address Groups in a non - NSX firewall?
Correct Answer:
QUESTION 4 OF 5
Which is not a SaaS product?
Correct Answer: C
QUESTION 5 OF 5
Which interface mode do you use to generate the statdump file that can be converted into an SLR? Assume that the SE wants to make the evaluation as unintrusive as possible.
Correct Answer: C
Question 1 of 5